Kia Optima Hybrid: Automatic Transaxle Control System / Input Speed Sensor Specifications

Specifications
Type: Hall effect sensor
Operation condition (°C)°F
((-)40 ~ 150)) -40 ~ 302
Air gap(mm)in.
(0.95~1.65) 0.037 ~ 0.065
Output voltage(V)
High
1.18 ~ 1.68
Low
0.59 ~ 0.84

Input Speed Sensor Description and Operation

Description Input speed sensor is a vital unit that measures the rate of rotation of the input shaft inside the transaxle and delivers the readings to the TCM. The sensor provides critical input data that''s ...

Input Speed Sensor Schematic Diagrams

Circuit Diagram ...

Other information:

Kia Optima Hybrid (TF HEV) 2016-2020 Service Manual: Engine Control Module (ECM) Repair procedures


Removal 1. Shut off the High Voltage circuit. (Refer to “High Voltage Shut-off Procedures”) 2. Turn the ignition switch OFF and disconnect the auxiliary 12V negative (-) battery terminal. 3. Remove the air cleaner assembly. (Refer to Engine Mechanical System - "Intake And Exhaust System") 4. Disconnect ...

Kia Optima Hybrid (TF HEV) 2016-2020 Service Manual: Brake Line Repair procedures


Removal 1. Disconnect the brake fiuid level switch connector, and remove the reservoir cap. 2. Remove the brake fluid from the master cylinder reservior with a syringe.     Do not spill brake fluid on the vehicle, it may damage the paint; if brake fluid does contact the paint, wash it off immediately ...

© 2021 Copyright www.koptimatfhev.com