Kia Optima Hybrid: Engine Electrical System / Cruise Control System
Removal and Installation 1. Disconnect the battery negative terminal (B) first, then the positive terminal (A). Tightening torque : (+) terminal (A) : 7.8 ~ 9.8N.m (0.8 ~ 1.0kgf.m, 5.8 ~ 7.2lb-ft) (-) ...
Cruise Control The cruise control system is engaged by the cruise "ON/OFF" main switch located on right of steering wheel column. The system has the capability to cruise, coast, accelerate and resume speed. ...
Inspection Wrap tin foil around the end of the voltmeter test lead to prevent damaging the heater line. Apply finger pressure on the tin foil, moving the tin foil along the grid line to check for open circuits. 1. Turn on the defogger switch and use a voltmeter to measure the voltage of ...
Inspection 1. Turn the ignition switch OFF. 2. Disconnect the ECTS connector. 3. Remove the ECTS. 4. After immersing the thermistor of the sensor into engine coolant, measure resistance between the ECTS terminals 3 and 4. 5. Check that the resistance is within the specification. TemperatureResistance ...
Auxiliary 12V Battery Repair procedures
Description and OperationOther information:
Kia Optima Hybrid (TF HEV) 2016-2020 Service Manual: Rear Glass Defogger Printed Heater Repair procedures
Kia Optima Hybrid (TF HEV) 2016-2020 Service Manual: Engine Coolant Temperature Sensor (ECTS) Repair procedures