Kia Optima Hybrid: Automatic Transaxle Control System / 35R Clutch Control Solenoid Valve (35R/C_VFS) Specifications

Specifications
Direct control VFS[35R/C]
Control type : Normal high type
Control Pressure kpa
(kgf/cm?, psi)
500.14 ~ 9.81
(5.1 ~ 0.1, 72.54 ~ 1.42)
Current value (mA)
50 ~ 850
 Internal resistance (?)
5.1

35R Clutch Control Solenoid Valve (35R/C_VFS) Description and Operation

Description 35R clutch control solenoid valve(35R/C_VFS) is attached to the valve body. This variable force solenoid valve directly controls the hydraulic pressure to the 35R clutch. ...

35R Clutch Control Solenoid Valve (35R/C_VFS) Schematic Diagrams

Circuit Diagram ...

Other information:

Kia Optima Hybrid (TF HEV) 2016-2020 Service Manual: Front Cross Member Repair procedures


Replacement 1. Remove the front wheel & tire. Tightening torque: 88.3 ~ 107.9N.m(9.0 ~ 11.0kgf.m, 65.1~79.6lb-ft)     Be careful not to damage to the hub bolts when removing the front wheel & tire. 2. Loosen the bolt (A) and then disconnect the universal joint assembly from the pinion ...

Kia Optima Hybrid (TF HEV) 2016-2020 Service Manual: Transaxle Oil Temperature Sensor Description and Operation


Description Transaxle oil temperature sensor monitors the automatic transaxle fluid''s temperature and conveys the readings to TCM. It is an NTC (Negative Thermal Coefficient) sensor whose resistance has an inversely proportional relationship with the temperature level. Data produced by this sensor is ...

© 2025 Copyright www.koptimatfhev.com