| Specifications |
| Control pressure kpa (kgf/cm?, psi) | 490.33 (5.0, 71.12) |
| Internal resistance(?) | 10 ~ 11 |
SS-B Solenoid Valve (ON/OFF) Description and OperationDescription The SS-B solenoid valve is attached to the valve body and is an SS-B solenoid valve that is used to change gears. ...
SS-B Solenoid Valve (ON/OFF) Schematic DiagramsCircuit Diagram ...
Removal Balance Shaft Module (BSM) Chain System 1. Remove the timing chain. (Refer to Timing system in this group) 2. Install a stopper pin (A) after compressing the balance shaft chain tensioner. 3. Remove the balance shaft chain hydraulic tensioner (B). 4. Remove the balance shaft chain tensioner arm ...
Refrigerant System Service Basics • Since the electric compressor uses high-voltage, you should use PVE or POE oil which have high Volumetric Resistivity. • Do not use the same A/C recovery / charging station as conventional belt-driven compressors. If the PVE or POE oil of the system ...