Description |
Never attempt to measure the circuit resistance of the airbag
module (squib) even if you are using the specified tester. If the
circuit resistance is measured with a tester, accidental airbag
deployment will result in serious personal injury. |
Removal 1. Disconnect the battery negative cable and wait for at least three minutes before beginning work. 2. Remove the glove box housing. (Refer to the Body group- crash pad). 3. Disconnect the passenger ...
Components ...
Components - 1 [ General ] 1. Headrest2. Headrest guide3. Rear seat back cover4.Rear seat back frame assembly5. Rear back armrest board6. Rear seat cushion cover7. Rear back armrest8. Rear seat cushion frame assembly Components - 2 [ Seat folding ] 1. Headrest2. Headrest guide3. Rear side cover4. Rear ...
Inspection Front Door Lock Actuator Inspection 1. Remove the front door trim. (Refer to the BD group - "Front door") 2. Remove the front door module. 3. Disconnect the 7P connector from the actuator. 4. Check actuator operation by connecting power and ground according to the table. To prevent damage ...