Kia Optima Hybrid: Airbag Module / Side Airbag (SAB) Module Components and Components Location
| Components |
Side Airbag (SAB) Module Description and Operation
Description The Side Airbags (SAB) are installed inside the front seat and protects the driver and passenger from danger when side crash occurs. The SRSCM determines deployment of side airbag by using ...
Side Airbag (SAB) Module Repair procedures
Removal The side airbag cannot be disassembled from the seat back assembly, so replace the seat back assembly when replacing the side airbag. 1. Disconnect the battery negative cable and ...
Other information:
Kia Optima Hybrid (TF HEV) 2016-2020 Service Manual: Side Impact Sensor (SIS) Description and Operation
Description Side Impact Sensor (SIS) system consists of two P-SIS which are installed at each center of the front door module (LH and RH) and two SIS which are installed at each center pillar nearby (LH and RH). Side Pressure Sensor is also called P-SIS because it detects pressure due to collision at ...
Kia Optima Hybrid (TF HEV) 2016-2020 Service Manual: Output Speed Sensor Repair procedures
Inspection 1. Check signal waveform of Input & output speed sensor using the GDS. Specification: Refer to "Signal Wave Form" section. Removal • Be sure to read and follow the “General Safety Information and Caution” before doing any work related with the high voltage system. Failure ...