Kia Optima Hybrid: Automatic Transaxle Control System / 26 Brake Control Solenoid Valve(26/B_VFS) Specifications

Specifications
Direct control VFS[26/B]
Control type : Normal low type
Control Pressure kpa
(kgf/cm?, psi)
9.81 ~ 500.14
(0.1 ~ 5.1, 1.42 ~ 72.54)
Current value (mA)
50 ~ 850
 Internal resistance (?)
5.1

26 Brake Control Solenoid Valve(26/B_VFS) Description and Operation

Description 26 brake control solenoid valve(26/B_VFS) is attached to the valve body. This variable force solenoid valve directly controls the hydraulic pressure to the 26 brake. ...

26 Brake Control Solenoid Valve(26/B_VFS) Schematic Diagrams

Circuit Diagram ...

Other information:

Kia Optima Hybrid (TF HEV) 2016-2020 Service Manual: Rain Sensor Repair procedures


Inspection Rain Sensing Wiper 1. In IGN2 ON state, if auto switch input (LIN communication) is ON then both wiper low relay and wiper high relay outputs are controlled by the rain sensor input signal. 2. If the wiper switch has been left in automatic mode with the vehicle ignition OFF, and then the vehicle ...

Kia Optima Hybrid (TF HEV) 2016-2020 Service Manual: Parking Assist Sensor Repair procedures


Removal 1. Disconnect the negative (-) battery terminal. 2. Remove the front/rear bumper. (Refer to Body - "Front Bumper cover") (Refer to Body - "Rear Bumper cover") 3. Disconnect the connector (A) from the sensor. [Front] [Rear] 4. Pull out the sensor (A) by opening the sensor holder (B) out. [Front] ...

© 2021 Copyright www.koptimatfhev.com