Kia Optima Hybrid: Airbag Module / Passenger Airbag (PAB) Module Description and Operation

Kia Optima Hybrid (TF HEV) 2016-2020 Service Manual / Restraint / Airbag Module / Passenger Airbag (PAB) Module Description and Operation

Description
The passenger airbag (PAB) is installed inside the crash pad and protects the front passenger in the event of a frontal crash. The SRSCM determines if and when to deploy the PAB.
   
Never attempt to measure the circuit resistance of the airbag module (squib) even if you are using the specified tester. If the circuit resistance is measured with a tester, accidental airbag deployment will result in serious personal injury.
Driver Airbag (DAB) Module and Clock Spring Repair procedures

Removal 1. Set the front tires straight-ahead before removing the steering wheel.     If the steering wheel and the front tires are not set straight ahead together, it affects the number of circulation ...

Passenger Airbag (PAB) Module Components and Components Location

Components ...

Other information:

Kia Optima Hybrid (TF HEV) 2016-2020 Service Manual: TPMS Receiver Description and Operation


Description It automatically searches the sensor location and learns new sensors. It uses the sensor information, distance travelled, indistinct noise, automatic learning status, vehicle battery condition and inner receiver condition to determine whether there is defect in system or vehicle. Mode 1. ...

Kia Optima Hybrid (TF HEV) 2016-2020 Service Manual: Engine Control Module (ECM) Repair procedures


Removal 1. Shut off the High Voltage circuit. (Refer to “High Voltage Shut-off Procedures”) 2. Turn the ignition switch OFF and disconnect the auxiliary 12V negative (-) battery terminal. 3. Remove the air cleaner assembly. (Refer to Engine Mechanical System - "Intake And Exhaust System") 4. Disconnect ...

© 2022 Copyright www.koptimatfhev.com