Kia Optima Hybrid: Automatic Transaxle Control System / Overdrive Clutch Control Solenoid Valve (OD/C_VFS) Specifications

Kia Optima Hybrid (TF HEV) 2016-2020 Service Manual / Automatic Transaxle System / Automatic Transaxle Control System / Overdrive Clutch Control Solenoid Valve (OD/C_VFS) Specifications

Specifications
Direct control VFS [OD/C]
Control type : Normal high type
Control Pressure kpa
(kgf/cm?, psi)
500.14 ~ 9.81
(5.1 ~ 0.1, 72.54 ~ 1.42)
Current value (mA)
50 ~ 850
 Internal resistance (?)
5.1

Overdrive Clutch Control Solenoid Valve (OD/C_VFS) Description and Operation

Description Overdrive clutch control solenoid valve(OD/C_VFS) is attached to the valve body. This variable force solenoid valve directly controls the hydraulic pressure to the overdrive clutch. ...

Overdrive Clutch Control Solenoid Valve (OD/C_VFS) Schematic Diagrams

Circuit Diagram ...

Other information:

Kia Optima Hybrid (TF HEV) 2016-2020 Service Manual: Intake Air Temperature Sensor (IATS) Repair procedures


Inspection 1. Turn the ignition switch OFF. 2. Disconnect the IATS connector. 3. Measure resistance between the IATS terminals 3 and 4. 4. Check that the resistance is within the specification. Temperature [°C(°F)]Resistance (k?)-40(-40)40.93 ~ 48.35-20(-4)13.89 ~ 16.030(32)5.38 ~ 6.0910(50)3.48 ~ ...

Kia Optima Hybrid (TF HEV) 2016-2020 Service Manual: 35R Clutch Control Solenoid Valve (35R/C_VFS) Repair procedures


Inspection 1. Turn ignition switch OFF. 2. Remove the air duct (A). Tightening torque: 7.8 ~ 9.8 N.m (0.8 ~ 1.0 kgf.m, 5.8 ~ 7.2 lb-ft) 3. Remove the air cleaner assembly. (1) Disconnect the breather hose (A). (2) Disconnect the air intake hose (B) and then remove the air cleaner assembly (C). Tightening ...

© 2022 Copyright www.koptimatfhev.com