Components |
1. EPB Unit 2. EPB Switch 3. Brake Caliper | 4. EPB Warning Lamp 5. AUTO HOLD Lamp |
Removal Parking Brake Pedal 1. Turn ignition OFF and disconnect the negative (-) battery cable. 2. Remove the crash pad lower panel and reinforcing panel. (Refer to the Body group - crash pad) 3. Remove ...
Description Description of EPB The EPB is an electronic parking brake. The EPB is different from existing parking systems which operated with the brake pedal or the lever type. The EPB system sends the ...
Removal • Be sure to read and follow the “General Safety Information and Caution” before doing any work related with the high voltage system. Failure to follow the safety instructions may result in serious electrical injuries. • Be sure to shut off the high voltage circuit according ...
Removal 1. Disconnect the battery negative cable, and wait for at least three minutes before beginning work. 2. Remove the front seat assembly. (Refer to BD group) 3. Loosen the two STPS screws, then remove the STPS after disconnecting the STPS connector. Installation Be sure to install ...