Kia Optima Hybrid: Airbag Module / Driver Airbag (DAB) Module and Clock Spring Description and Operation

Kia Optima Hybrid (TF HEV) 2016-2020 Service Manual / Restraint / Airbag Module / Driver Airbag (DAB) Module and Clock Spring Description and Operation

Description
Driver Airbag (DAB) is installed in the steering wheel and electrically connected to SRSCM via the clock spring. It protects the driver by deploying the airbag when frontal crash occurs. The SRSCM determines deployment of the Driver Airbag (DAB).
   
Never attempt to measure the circuit resistance of the airbag module (squib) even if you are using the specified tester. If the circuit resistance is measured with a tester, accidental airbag deployment will result in serious personal injury.
Airbag Module

...

Driver Airbag (DAB) Module and Clock Spring Components and Components Location

Components 1. Driver Airbag (DAB)2. Steering Wheel3. Clock Spring ...

Other information:

Kia Optima Hybrid (TF HEV) 2016-2020 Service Manual: Power Seat Motor Repair procedures


Inspection Power Seat Motor 1. Disconnect the connectors for each motor. A : Front height motor B : Slide motor C : Rear height motor D : Recline motor E : Lumber support motor 2. With the battery connected directly to the motor terminals, check if the motors run smoothly. 3. Reverse the connections ...

Kia Optima Hybrid (TF HEV) 2016-2020 Service Manual: Oil Pump Uni t(OPU) Schematic Diagrams


OPU connector and terminal function OPU terminal function [A] PinDescription1Main relay power2Ground3Motor phase power(U)4Motor phase power(V)5Motor phase power(W) [B] PinDescription1Battery power (+)2Battery power (+)3CAN communication line (Low)4OPU status signal5Hall sensor ground6Hall sensor power(+5V)7IG_Key9CAN ...

© 2021 Copyright www.koptimatfhev.com