Components |
Description Curtain airbags are installed inside the headliner (LH and RH) and protect the driver and passenger from danger when side crash occurs. The SRSCM determines deployment of curtain airbag by ...
Removal 1. Disconnect the battery negative cable and wait for at least 3 minutes before beginning work. 2. Remove the roof trim. (Refer to the Body group - "Interior") 3. Disconnect the curtain airbag ...
Description Continuous Variable Valve Timing (CVVT) system advances or retards the valve timing of the intake and exhaust valve in accordance with the ECM control signal which is calculated by the engine speed and load. By controlling CVVT, the valve over-lap or under-lap occurs, which makes better fuel ...
Removal Blind spot detection (BSD) unit 1. Disconnect the negative (-) battery. Be careful when removing the blind spot detection unit. The bracket may break off from the bumper. 2. Remove the rear bumper. (Refer to Body - "Rear Bumper Cover") 3. Disconnect the BSD connector (A) from the ...